Lpc2000

At 01:01 AM 8/12/04 -0500, you wrote:
>There might be some way to trick the bootloader and the chip into
>programming the Flash.  Perhaps the Flash time periods would then be
>off.  It might still work.
>
>I think the source is available for Maurer's bootloader, so if it does
>set the serial speed, we might be able to change it to set it to one
>quarter of what it will tell the LPC chip.

I think you misunderstood.  The 10MHz limit is listed as the minimum 
operating frequency (for all conditions) not a minimum programming 
frequency.  I'd expect most chips would work at least a little below that 
but more than a factor of 2 is probably wishful thinking.

There are other small ARMs that will work with lower frequency inputs (The 
AD parts come to mind).

Robert


" 'Freedom' has no meaning of itself.  There are always restrictions,
be they legal, genetic, or physical.  If you don't believe me, try to
chew a radio signal. "

                         Kelvin Throop, III