Lpc2000

Hi,

I'm trying to enable interrupt with timer1 on the LPC2106. I 
configured Timer1 as IRQ source when its value correspond with the 
match register 0... but interrupt routine service doesn't run and is 
never reached. Here is a piece of my code:

  __disable_interrupt(); // IAR intrinsic
//VIC enable registers
  VICProtection=0x0;    

//clears bits in the Interrupt Enable register  
  VICIntEnClear=0xffffffff;   

  VICIntEnable=0x20;    //Timer1
  VICIntSelect=0x00;    //all interrupts are IRQs
  VICVectCntl0=0x25;    
  VICVectAddr0=(unsigned long)&Timer1ISR;

  __enable_intrinsic();

  Then I also initialize Timer1:

  T1_IR=0x00;
  T1_MR0=TIMERMATCH;
  T1_MCR=0x03;  // reset timer and fire interrupt        
  T1_PR=0x0;         
  T1_TC=0x00;   
  T1_TCR=0x01;  // start the timer

__arm __irq void Timer1ISR(void) //Timer1 ISR
{
T1_IR=0x01; //reset interrupt flag
VICVectAddr=0; //reset VIC
return;
}

My questions are:

- what is wrong with this code?
- could it be a problem with the intrinsic functions of IAR    
__enable_interrupt() and __disable_interrupt(); they seem not to 
work; does anybody their asm code??

Any help would be appreciated!

thanx