Lpc2000

Hi,
I uses LPC2292 and I have this same problem with DEVICE ID.
When I want to find 'Part ID:50462483' in 
'Philips LPC2xxx Microcontroller Part ID Table:' document, this ID is 
also for LPC2194.
'LPC Flash Utility V2.1.0' give me the same ID. I don't know, where is 
problem and how is reason as well.

BTW: I don't uses phytec board, I uses my test board (http://www.
geocities.com/kralikbo/sch.jpg).

--- In lpc2000@yahoogroups.com, "andlsouza" <andlsouza@y...> wrote:
> 
> Hello,
> 
> I'm using the configuration below:
> 
> LPC2294 using Phytec phyCORE Single Board Computer and emulator Keil 
> under Windows XP and LPC2000 Flash Utility v 2.2.0.
> 
> When i press "Read Device ID" button, the program Flash Utility 
> returns another device name, (LPC2194).
> 
> Although the sample program "BLINK" is loaded correctly in the 
flash, 
> the D3 led doesn´t blink as expected when i press the S2 switch 
> (Reset).
> 
> I have checked the cables (USB and RS232) and the jumpers. They are 
> ok.
> 
> I would appreciate if someone could help me on this subject.
> 
> Regards, 
> André