Lpc2000

hi,
i am putting jumper at p0.14 to low to enter into bootloadermode and upload program into flash.then i remove jumper to make p0.14 to high and reset to execute program,but it won't execute
 
thanks in advance,
mani

Richard <richas@...> wrote:

Are you removing (adding?) the jumper to disable ISP mode?

Richard

--- In lpc2000@yahoogroups.com, manikandan palaniappan 
<aravindar_manikandan@y...> wrote:
> hi,
> i am using tinyarm lpc2106 from ramtek.i download the example from 
donotronics mb40_examples.zip(Dontronics - TinyARM DIP40/50 with 
Philips LPC2106/2129 ... websitefor -www.dontronics.com/pasat.html)
for lpc2106.i am using IAR EmbeddedWorkBench version 4.10A for 
producing intel hex file and downloading code into flash Using 
philips ISP.program executed successfully.we also having lpc2104 
board and i want to do the same example by changing project option in 
target to lpc2104 chip,compiled and getting intel hex output without 
any errors.when i downloaded the program into flash it was downloaded 
successfully ,but it is not executing.i am using uart example to 
transmit the character typed from keyboard.is there any other setting 
to be changed?i also need uart example program for lpc2104.
>  
> Thanks in advance,
> pl.manikandan
> 
>                   
> ---------------------------------
> Do you Yahoo!?
>  Check out the new Yahoo! Front Page.  www.yahoo.com/a
> 
> [Non-text portions of this message have been removed]




Yahoo! Groups Sponsor 
Get unlimited calls to

U.S./Canada


---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/lpc2000/
  
   To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


			
---------------------------------
Do you Yahoo!?
 Check out the new Yahoo! Front Page.  www.yahoo.com/a

[Non-text portions of this message have been removed]