On Fri, 26 Dec 2003 14:36:29 -0500, Robert Adsett wrote: At 11:02 AM 12/26/03 -0600, you wrote: >PS - I would appreciate if someone could try out the settings >(M=3, P=2) even w/ the standard 10MHz crystal and see if the LPC >operates as expected. Thanks again. Simple enough. -- It appears to work just fine. A little hard to tell what the internal clock frequency actually is, but serial port seems to work as expected. Robert =============================================================== Thanks Robert. I assume you mean the serial port is working at 1/2 the data rate compared to when the PLL was configured with M=6,P=2 using the same crystal. -Bill
Message
Re: [lpc2100] PLL
2003-12-26 by Bill Knight