Lpc2000

--- In lpc2000@yahoogroups.com, "Leon Heller" <leon_heller@h...> 
wrote:
> 
> >From: "theeuwke" <theeuwke@y...>
> >Reply-To: lpc2000@yahoogroups.com
> >To: lpc2000@yahoogroups.com
> >Subject: [lpc2000] Wiggler + Crossworks works, ocdremote not?
> >Date: Mon, 06 Dec 2004 11:03:24 -0000
> >
> >
> >
> >Hi everybody again.
> >
> >I'v finally got the Ashling LPC2106 AND my custom 2292 board 
working.
> >But... Only in Crosworks from Rowley??? (And it runs perfectly). I
> >configured the LPC2106 according to the Omilex schematics, and the
> >LPC2292 to the Omilex 2129 schematics. That seems to work, but if 
I
> >try the ocdremote I get most of the time "Cable disconnect" and 
some
> >times "Not in background". I use Leon's schematic, but use a 
74HC244N
> >and a BC547C. I tried all speeds.
> >
> >I am suspecting the Transistor, but it's just an ordinary NPN
> >transistor. On the scope I see the nRST pulled up and data on TDI,
> >but there is no data getting out. Connecting TRST instead is not 
the
> >solution.
> 
> Weird! I actually used a 74HC244 for my 'Wiggler alike', and the 
BC547C 
> should work OK. Does it work with Crossworks at maximum speed?
> 
> Leon

I tested it til speedsetting (divider) 6