Lpc2000

--- In lpc2000@yahoogroups.com, "digtalfreak" <digitalfreak@n...> 
wrote:
> 
> Cut of the reset signal and try again.
> At my design it was a problem with the reset. OCDlibremote should 
work
> also with cut of nrst.
> 
> --- In lpc2000@yahoogroups.com, "theeuwke" <theeuwke@y...> wrote:
> > 
> > Hi everybody again.
> > 
> > I'v finally got the Ashling LPC2106 AND my custom 2292 board 
working. 
> > But... Only in Crosworks from Rowley??? (And it runs perfectly). 
I 
> > configured the LPC2106 according to the Omilex schematics, and 
the 
> > LPC2292 to the Omilex 2129 schematics. That seems to work, but if 
I 
> > try the ocdremote I get most of the time "Cable disconnect" and 
some 
> > times "Not in background". I use Leon's schematic, but use a 
74HC244N 
> > and a BC547C. I tried all speeds.
> > 
> > I am suspecting the Transistor, but it's just an ordinary NPN 
> > transistor. On the scope I see the nRST pulled up and data on 
TDI, 
> > but there is no data getting out. Connecting TRST instead is not 
the 
> > solution.
> > 
> > Bart

So then there is absolutelly no reset connection?