Lpc2000

--- In lpc2000@yahoogroups.com, "tsvetanusunov" <tusunov@m...> wrote:
> 
> Hello Ron,
> 
> > c- i cannot get it to work via the IAR debugger, not in ram or 
> flash,
> >    i can activate relay, on/off and toggle leds, but cannot 
> get         
> >    push-buttons and LCD screen to work??? In the IAR debugger there 
> is 
> >    complete strange behavior, e.g. IOPIN is not refecting the 
> actual   
> >    status!!!
> > d- when i make a .hex file with EWARM and download it with Philips 
> ISP
> >    it works fine!!!
> 
> everything is fine :) just read the LPC2106 manual, when JTAG is 
> enabled all ports above P0.16 are not available and set to secondary 
> JTAG function, as LCD and buttons use ports above P0.16 you can't use 
> them while you debug.
> 
> Best regards
> Tsvetan
> ---
> PCB prototypes for $26 at http://run.to/pcb 
> (http://www.olimex.com/pcb)
> PCB any volume assembly (http://www.olimex.com/pcb/protoa.html)
> Development boards for ARM, AVR, PIC, and MSP430  
> (http://www.olimex.com/dev)



Tsvetan,


Thanks a lot, This will end my ethernal search.


regards


ron