Lpc2000

Hi Karl,

the User's Manual has been posted in the file section (by John).

The 2132 and 2131 have an extra Flash area for the boot loader. 64k /
32k are all available to the user.

SSP Fifo 16 messages (see UM), data length any value between 4-bit and
16-bit.

Why not changed both SPI to SSP, legacy / compatibility. The old SPI
let's you switch between master and slave mode on the fly, the SSP
sort of does not. This feature is not typical in SPI usage but..  some
people might use / want it.

Hope these answers help.

Robert


--- In lpc2000@yahoogroups.com, "Karl Olsen" <kro@p...> wrote:
> 
> --- In lpc2000@yahoogroups.com, "philips_apps" <philips_apps@y...> 
> wrote:
> 
> > btw. Users Manual will probably take another week or two.
> 
> philips_apps, any news on the updated User Manual?  And an errata 
> sheet?
> 
> With the new POR, can you just tie /RESET to VDD?
> 
> The Aug 25 manual says that the boot loader uses 12 KB in the 
> LPC2138, leaving 500 KB for the user, but in the LPC2132 it uses 0 
> KB.  Does the LPC2132 (and LPC2131) have an extra secret 12 KB flash 
> or ROM, or is there really only 20KB/52KB left in the LPC2131/32?  Or 
> is there no boot loader at all?
> 
> How large is the SSP FIFO?  And can SSPCR0.DSS (data size) be set to 
> any size between 4 and 16 bits, or are only 4, 8, and 16 allowed?
> 
> (And why didn't you change both SPI controllers to SSP?  The 
> master /SSEL "feature" is apparently only fixed in the SSP?)
> 
> Karl Olsen