Lpc2000

Hello Leon,

> I can't get it running any faster than 38.4 k

just found a table in the manual page 185, where possible baudrates are
listed.
With 10 MHz only 38400 is possible. With 14,745 MHz it goes up to 230
kbit/s,
but current philips ISP tool doesn't support it...

Greetings,

         Martin

----- Original Message ----- 
From: "Leon Heller" <leon_heller@...>
To: <lpc2100@yahoogroups.com>
Sent: Monday, January 05, 2004 11:01 AM
Subject: Re: [lpc2100] Small Problems with ISP Utility -> Solutions / self
written ISP utility ?


>
> ----- Original Message ----- 
> From: "Hugh O'Keeffe" <hugh.okeeffe@...>
> To: <lpc2100@yahoogroups.com>
> Sent: Monday, January 05, 2004 9:52 AM
> Subject: RE: [lpc2100] Small Problems with ISP Utility -> Solutions / self
> written ISP utility ?
>
>
> >
> > Hi Martin,
> >
> >
> > The LPC2xxx Flash Boot Loader (FBL) firmware appears to have trouble on
> > certain PCs with the autobaud synchronisation at high baud rates. If you
> > get comms problems at 115K/bs then lower this value.  Also, reset your
> > LPC2xxx board every time prior to connection to the PC.
>
> I can't get it running any faster than 38.4 k
>
> Leon
> --
> Leon Heller, G1HSM
> Email: aqzf13@...
> My low-cost Philips LPC210x ARM development system:
> http://www.geocities.com/leon_heller/lpc2104.html
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
>  http://groups.yahoo.com/group/lpc2100/
>
> To unsubscribe from this group, send an email to:
>  lpc2100-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
>  http://docs.yahoo.com/info/terms/
>
>