Re: [lpc2100] Small Problems with ISP Utility
2004-01-06 by capiman@t-online.de
Hello Leon,
> I can't get it running any faster than 38.4 k
just found a table in the manual page 185, where possible baudrates are
listed.
With 10 MHz only 38400 is possible. With 14,745 MHz it goes up to 230
kbit/s,
but current philips ISP tool doesn't support it...
Greetings,
Martin
----- Original Message -----
From: "Leon Heller" <leon_heller@...>
To: <lpc2100@yahoogroups.com>
Sent: Monday, January 05, 2004 11:01 AM
Subject: Re: [lpc2100] Small Problems with ISP Utility -> Solutions / self
written ISP utility ?Show quoted textHide quoted text
> > ----- Original Message ----- > From: "Hugh O'Keeffe" <hugh.okeeffe@...> > To: <lpc2100@yahoogroups.com> > Sent: Monday, January 05, 2004 9:52 AM > Subject: RE: [lpc2100] Small Problems with ISP Utility -> Solutions / self > written ISP utility ? > > > > > > Hi Martin, > > > > > > The LPC2xxx Flash Boot Loader (FBL) firmware appears to have trouble on > > certain PCs with the autobaud synchronisation at high baud rates. If you > > get comms problems at 115K/bs then lower this value. Also, reset your > > LPC2xxx board every time prior to connection to the PC. > > I can't get it running any faster than 38.4 k > > Leon > -- > Leon Heller, G1HSM > Email: aqzf13@... > My low-cost Philips LPC210x ARM development system: > http://www.geocities.com/leon_heller/lpc2104.html > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/lpc2100/ > > To unsubscribe from this group, send an email to: > lpc2100-unsubscribe@yahoogroups.com > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > >