Lpc2000

Please find the attachment images. I already
posted I am designing a development
board for Philips
LPC2106.
It is simply desinged to make ARM
work.
 
Main features of the
board:
 
- One RS-232 Interface with
RX-TX
- One Full RS-232 Interface with all modem signals
etc.
- Standart 2x16 Dot matrix character LCD connector with
backlight
- On board 3.3V and 1.8V voltage regulators and two
power LEDs
- LPH7779 84x48 Graphic LCD (Nokia-3310 LCD) Board
Mount
  (uses standart IO pins, not SPI)
- 20pin
Connector for Wiggler JTAG interface
 
  - an 6
ch. DIP switch is used for selecting Graphic/Character LCD
  -
an 8 ch. DIP switch isolates UART1 pins from level shifter IC if it is not
used
  - it is possible to replace 8ch DIP switch with 8pin
header connector
    if logic level uart signals needed for
embedded modems etc. same
    is provided for uart0 too with 4
pin header connector.
  - reset switch for CPU
  - SPI
connector with all SPI singals and 3.3V VDD and GND
  - Bypass
caps for every IC (check the PCB drawing and 3d pics)
  - A
little prototyping area
 
 
I
designed this board for my own use, I usually make my
own
development boards for new microcontrollers/FPGAs
etc.
 
Actually I am waiting my order at PCB fab.
They are busy now
and I have chance to modify and fix the board
before they start
manufacturing of
prototypes.
 
""Helpful Opinions, recommendations
are welcome!""
 
Best
Regards