Yahoo Groups archive

Lpc2000

Index last updated: 2026-04-28 23:31 UTC

Message

Re: Development tools

2005-01-20 by lpc2100_fan

Hi Ken,

first question, where are you located?
Assuming in the USA:
Look at Nohau for Emulators first 
if Europe I would look at Hitex and Ashling more closely (timezones do
matter!)
Keil and IAR offer JTAG emulators that work with their debuggers. Can
be purchased from Philips or www.LPCtools.com evlaution board with
JTAG hardware for $299 for a testdrive. Hardware is fully functional,
compiler and debuggers are code size limited. 
There is ARM with their RVDK (Real View Devloper Kit) works OK with
the LPC but still needs improvement dedicated support from ARM.
At this point in time you might not want to use Greenhills although it
is a good compiler. No support for programming the Flash through the
debugger :-(
If cost is more important than small code, have a look at Rowleys package.

You can find these and more at the Philips website:
sorry for the long URL:
http://www.semiconductors.philips.com/markets/mms/products/microcontrollers/support/development_tools/tools_by_family/


btw. the easiest and fastest start are the two evaluation kits from
Philips in cooperation with IAR (LPC2104/05/06) and Keil (64-pin
devices). 

Cheers, Bob


--- In lpc2000@yahoogroups.com, "kenbnny" <kenbnny@y...> wrote:
> 
> Guys,
> 
> Any advice on who is best in the market for the development tools for 
> LPC2000 with Emulators in terms of price and performace adn ofcourse 
> support.
> 
> Rgds,
> Ken

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.