Lpc2000

I sm actually starting out with your code. The major work here is 
that, in this case, the ethernat chip is connected to the external 
bus as 16-bit. So, I have to change your driver to use the external 
bus. It seems easy to me but I always read the "chip id" no matter 
what I do!!!! I think the write_register() code is not working in my 
case.

The big goal is to run IwIP in the fututre or any full TCP/IP stack.

Gus

--- In lpc2000@yahoogroups.com, "Paul Curtis" <plc@r...> wrote:
> Gus,
> 
> I ported uIP to the E2124 and it works on that part, but that's in
> polled mode.  I don't have a port of uIP for that board as I don't 
have
> the board.
> 
> If you have any success with it, please let me know--I'd be 
interested
> to see what you make of the board as it's way over specified to 
run uIP,
> better would be lwIP.
> 
> --
> Paul Curtis, Rowley Associates Ltd  http://www.rowley.co.uk
> CrossWorks for MSP430, ARM, AVR and (soon) MAXQ processors 
> 
> > -----Original Message-----
> > From: Gus [mailto:gus_is_working@y...] 
> > Sent: 07 February 2005 15:39
> > To: lpc2000@yahoogroups.com
> > Subject: [lpc2000] olimex LPC-E2294 with ethernet
> > 
> > 
> > 
> > Hello,
> > 
> > I spent all weekend trying to get the ethernet to work on olimex 
LPC-
> > E2294 board http://www.olimex.com/dev/lpc-e2294.html with no luck
> > 
> > Looking at the board schematics, they have the Ethernet chip 
> > "selected" all the time through R57!!! This is WRONG!! I 
> > don't understand why!!! So I removed R57 and installed R56 
> > instead. Now, when I read the chip, I always get the "chip 
> > ID" no matter what register I select!
> > 
> > Was anyone able to read the registers from CS8900A? Any 
> > hints? Even with thier test code, I wasn't able to get things 
> > going. The plan is to get uIP going on that board 
> > http://www.sics.se/~adam/uip/
> > 
> > Thanks,
> > 
> > Gus
> > 
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> > 
> >