Lpc2000

Hi,
I have just uploaded the gerber files and documentation to the module. 
The archive file is called LPC-M416 V1.0 CAM.zip. The name implies 
that the pin count is 40 and the JTAG connector has 16 pins. Take care 
to connect the stadard 20 pin JTAG (Wiggler Tool or similar) so that 
pin1 is in the right place. There is a marking on the pcb.
The module is basicly compatible to the Olimex LPC-H40 except that 
there is a JTAG connector on board, the 5 volt pin is not used and the 
supply must be 3.3 volts at pin 4.
If you are going to use the XIN it is a good idea not to assembled the 
crystal Q1. The pullup R6 may be redundant.
I haven't tested it yet. Leon checked the schematics and you can have 
a look at the pdf files yourself. However the risk of not working at 
all is negligible.

I would like to call this "PCB-ware" as an analogy to "Postcardware". 
This means that if you order a couple of pcbs and you have some left 
because the manufacturer won't make less than 100 x 100 mm please send 
one to me. Send me an email and I'll give you my address.

Good luck.
Eduardo

p.s.:
Anyone who is interested in the original EAGLE CAD files please send 
me an email. There will be a charge though since the amount of work 
was one full day.