Lpc2000

Bill,

Stupid me, I skipped that part in the datasheet :( 

Everything is OK now and my program is up and running :)

Thanks to you and to Varuzhan.

Regards

Paulo A.





>
>Paulo
>  P0.30 defaults to AIN3 at powerup.  You need to set its usage
>to GPIO in PINSEL1 before using it.
>
>Regards
>-Bill Knight
>R O SoftWare &
>http://www.theARMPatch.com
>
>
>
>
>On Fri, 25 Feb 2005 11:45:40 +0000, Paulo de Almeida wrote:
>
>
>
>
>Hi Varuzhan,
>
>Thanks for your reply. The strange thing is that the Philips Flash
>Utility works fine when doing a "Compare Flash" with the Olimex 
>suplied example HEX file.
>
>Ok, ignoring the "Compare Flash" error with my program I still dont
>understand why a stupid simple program like this:
>
>#include <LPC22xx.H>                     
>int main (void)  {
>     // define P0.30 as output                
>      IODIR0  = 0x40000000;      
>
>      // bring  P0.30 low (led is conect betwen VCC and P0.30)
>      IOCLR0 = 0x40000000;      
>                                                 
>      while (1);
>
>
>which uses the Keil suplied startup ASM file for the Philips LPC22xx
>does not work.
>
>Any ideas ?
>
>
>Regards
>
>Paulo A.
>
>
>
>
>
>>On Fri, 25 Feb 2005 14:56:28 +0400, you wrote:
>
>>Once or, maybe, even more in this forum was mentioned, that the
>>Philips Flash Utility has a bug, it does download, but do not work with
>>"Compare Flash" function.
>>Buy the way, V2.2.1 is now available, but again the bug is not corrected,
>>though, if Philips open its source code, any programmer can easily correct
>>this bug.
>
>>Varuzhan
>
>>  ----- Original Message ----- 
>>  From: Paulo de Almeida 
>>  To: lpc2000@yahoogroups.com 
>>  Sent: Friday, February 25, 2005 2:35 PM
>>  Subject: [lpc2000] Keil and LPC2294 - What am I doing wrong ?
>
>
>
>
>>  Hi,
>
>>  I'm using Keil (UV3) with the Olimex LPC-H2294 board and I just can't
>>  get any of my programs to work.  
>
>>  I made a very small program to turn on a led in the board using the
>>  Keil suplied Philips startup ASM file and just 2 lines of C code to
>>  setup the IO0DIR and to clear the desired pin. The program complies
>>  fine and the HEX file looks Ok (as far as I can tell) , I use the
>>  Philips LPC2000 Flash Utility V2.2.0 to upload the file and it works
>>  ok, but when I do a "Compare Flash" the Philips LPC2000 Flash Utility
>>  tells that the "file compare failed" and  the program does not run on
>>  the board.
>
>>  I have upload to the board (using the Philips LPC2000 Flash Utility )
>>  the HEX file with the exemple program suplied by Olimex and I DONT get
>>  "file compare failed" and the board works fine. So, the board is in
>>  perfect working condition.
>
>>  Can someone please give me some sugestion on what is going wrong , is
>>  there any special issue with Keil and the  ?
>
>
>>  Thanks
>
>>  Paulo A.
>
>>        Yahoo! Groups Sponsor 
>>              ADVERTISEMENT
>>             
>>       
>>       
>
>
>>------------------------------------------------------------------------------
>>  Yahoo! Groups Links
>
>>    a.. To visit your group on the web, go to:
>>    http://groups.yahoo.com/group/lpc2000/
>>      
>>    b.. To unsubscribe from this group, send an email to:
>>    lpc2000-unsubscribe@yahoogroups.com
>>      
>>    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
>
>
>
>>[Non-text portions of this message have been removed]
>
>
>
>> 
>>Yahoo! Groups Links
>
>
>
>> 
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>