Lpc2000

----- Original Message ----- 
From: "Micron Engineering" <micronpn@...>
To: <lpc2000@yahoogroups.com>
Sent: Friday, March 25, 2005 2:01 PM
Subject: Re: [lpc2000] Re: JTAG CONNECTOR


>
> leon_heller wrote:
>
>>--- In lpc2000@yahoogroups.com, Micron Engineering <micronpn@t...>
>>wrote:
>>
>>
>>>The standard 2x10 JTAG connector is very space consuming, is there
>>>
>>>
>>any
>>
>>
>>>other standard configuration suggested for JTAG connector?
>>>Massimo Manca, Micron Engineering
>>>
>>>
>>
>>Only seven connections are in fact used for the LPC2000. I'd select a
>>suitable small connector and make an adaptor for it, interfacing to
>>the standard connector. This sort of arrangement is quite common for
>>other MCUs that use a JTAG connector, like the MSP430. That actually
>>uses a 2x5 header as standard, but that is too big for some people.
>>
>>
> 2x5 may be ok for me. May you send me the pinout?
> Best regards,

Sorry, I was wrong. It's actually 2x7 and that's probably too big for you. 
Only seven pins are actually used, though. I'd just use 2x5 with your 
connection arrangement.

Leon