Lpc2000

Hello Leon 

I down load OCD Commander and short P1.8 and P1.15 as you mentioned .
OCD Commander can read the register and cpu status, but while i 
trying to download the elf file, it reports £º
*******************
D:\beep.elf: downloaded 1388 bytes in 0 minutes, 0.589 seconds
Error during download
PC set to starting address 0x00000000
*******************

This phenomenon is samilar to using armdebugfinal software.
If wiggler is doing well with lpc2104£¬why it can not going along 
with my lpc2124 chip. Faint...
I am trying my best to find it out.

Thanks for your help again.
Have a good day!

--- In lpc2000@yahoogroups.com, "Leon Heller" <leon.heller@d...> 
wrote:
> ----- Original Message ----- 
> From: "yekai1k" <yekai1k@y...>
> To: <lpc2000@yahoogroups.com>
> Sent: Friday, April 08, 2005 5:45 AM
> Subject: [lpc2000] Re: Wiggler with LPC2124
> 
> 
> >
> >
> > I made the wiggler board according to the file named "Wiggler
> > Schematic.pdf" in the JTAG folder.
> > I haven't tried OCD Commander, I will do it immediately.
> 
> You could try my JTAG interface design in jtag.zip. I know that 
works OK as 
> I use it myself. The one you are using won't work with OCD 
Commander without 
> a slight mod. - pins 8 and 15 on the DB-25 connector need to be 
connected. 
> The current OCD Commander software looks for that connection.
> 
> Leon
> --
> Leon Heller, G1HSM
> http://www.geocities.com/leon_heller