Lpc2000

Hi Joe,

  No problem. We get all our parts through Arrow, but we are part of
the Advantage program. What that means is our distributor is in Canada
(Halifax) but they represent all the upper east cost companies. I have
found that several people in this group have made several comments
that they have had problems getting the 2138, where my experince is
that we have had no problem at all. I guess it's all in who you talk to.

  Let me know and I can ship a couple out your way.

  Also thanks for asking about the 2148 since I was intereseted in
that as well. It seemed that Philips was being very tight lipped about
it. This will allow me to make some changes on my design for the 2148 now.

regards,
Charles



--- In lpc2000@yahoogroups.com, "Joe" <nospam1234@y...> wrote:
> 
> Charles
> Thank you for your kind offer, I will wait and see what Arrow finds out.
> Are you with a distributor, and if so which one? 
> Would I be able to order some from Indiana USA?
> Now that I know which pins are reserved for USB, it is back to the
> layout. If the 2138's are really available I may eliminate the 2129
> option jumpers, the CAN circuit and the 1.8V regulator section.
> Instead I will add a option for the 2148. 
> As always with Murphy law the data+/- pins are buried deep ;-), better
> now than later
> 
> Thanks 
> Joe
> 
> 
> --- In lpc2000@yahoogroups.com, "charlesgrenz" <charles.grenz@s...>
wrote:
> > 
> > Hi Joe,
> > 
> >   Let me know if you need anymore. I just checked our stock for 2138
> > and we have 400 in stock with 400 more coming. I can also send you two
> > samples if Arrow has problems getting more (free!).
> > 
> > regards,
> > Charles
> > 
> > --- In lpc2000@yahoogroups.com, "Joe" <nospam1234@y...> wrote:
> > > 
> > > The 2129 requires 1.8V, and is in production.
> > > I have received 2 samples of the 2138 from Arrow and they are trying
> > > to get me 2 more.
> > > 
> > > and my stock check at Arrow at 10:11am 4-13-05 shows
> > > "Philips  	LPC2132FBD64-S  	$7.49  	Qty:1,914
> > > Philips  	LPC2138FBD64-S Call For Quote.1-877-237-8621"
> > > 
> > > So the 2132 is in stock, the 2138 samples are available in limited
> > > quantity.
> > > 
> > > Joe
> > > 
> > > 
> > > 
> > > Order Online 	
> > > --- In lpc2000@yahoogroups.com, "charlesgrenz" <charles.grenz@s...>
> > wrote:
> > > > 
> > > > Hi Joe,
> > > > 
> > > >   The 2138 does not have a 1.8V input. Only 3.3V is needed to
> run the
> > > > 2138.
> > > > 
> > > >   You can get samples and buy units from Arrow Electronics. They
> have
> > > > around 2K in stock.
> > > > 
> > > > regards,
> > > > Charles
> > > > 
> > > > 
> > > > --- In lpc2000@yahoogroups.com, "Joe" <nospam1234@y...> wrote:
> > > > > 
> > > > > Bump
> > > > > 
> > > > > My timing was a little off before ;-)
> > > > > I now have over half the layout done, and have jumper
options for
> > > > > the 2129/2138.
> > > > > 
> > > > > I repeat my plea
> > > > > 
> > > > > IS THERE ANY CHANCE OF AT LEAST POSTING A PRELIMINARY
> > > > > (SUBJECT TO CHANGE)
> > > > > PIN DIFFERENCE BETWEEN THE LPC213x/LPC214x.
> > > > > 
> > > > > If Slide7.jpg in the file section is correct and  the 214x with
> > USB is
> > > > > to be sampling in  "H1 '05" you must have some idea of how the
> > pinout
> > > > > will be affected ;-)
> > > > > 
> > > > > It would also be nice to know when the LPC2138 will be
> available in
> > > > > production, the layout includes a 1.8V regulator and both
CAN and
> > > > > secondary I2C processor to processor communications hardware,
> > because
> > > > > I can not presently order 2138 from distribution.
> > > > > 
> > > > > Thanks in advance
> > > > > 
> > > > > Joe Bougher
> > > > > Bioanalytical Systems Inc.
> > > > > 2701 Kent Av. 
> > > > > West Lafayette IN 47906
> > > > > (765) 463-4527
> > > > > 
> > > > > 
> > > > > --- In lpc2000@yahoogroups.com, "Joe" <nospam1234@y...> wrote:
> > > > > > 
> > > > > > Philips-Apps 
> > > > > > 
> > > > > >  I know Philips does not like to post information before the
> > product
> > > > > > is real. 
> > > > > >  
> > > > > >  However I have to do a PCB layout in the next week or 2 of a
> > > > > LPC2138
> > > > > > and would REALLY like to anticipate changing over to the
LPC2148
> > > > > when
> > > > > > it is available.  
> > > > > > 
> > > > > >  Is there any chance of at least posting a preliminary
> (subject to
> > > > > > change) pin difference between the LPC213x/LPC214x.
> > > > > > 
> > > > > >  I am currently using USBN9604 on the SPI port for USB, and
> it is
> > > > > slow
> > > > > > and inefficient.
> > > > > > 
> > > > > > Thank in advance.
> > > > > > 
> > > > > > Joe