Lpc2000

Hi guys,

I have a pin (P0.16) set up as a capture pin CAP0.2 to copy timer0 
TC value into CR2 every time I detect a rising edge.

This is done using 
PINSEL1 |= 0x00000002;
T0CCR = 0x140;

The value 0x140 for T0CCR sets it up to detect rising edges and 
generate an interrupt. My problem is:
I want to record the contents of the CR2 register (ie. the TC when a 
rising edge is detected). I know the CR2 register gets the TC value 
when the rising edge occurs, however I need an interrupt routine to 
copy CR2 to my own data structure. My question is, how do I set up 
an interrupt method that is called by the capture pin?

I know it's got to do with VIC, but I'm unsure how to link an 
interrupt method, with the capture pin P0.16
eg, how do I link the interrupt method specified at vicvectaddr0 to 
occur when the capture pin is triggered by the rising edge?

Thanks for any advice,

Jason