Lpc2000

"Shut down sockets." *is* the error message returned from OCDRemote. It 
seems to just shut down when Insight successfully connects (yes, I get a 
"connected successfully" window pop up). I've also noticed that the process 
goes away (using Windows task manager)

I'm suspecting this is the pins 8-15 short problem with the Wiggler (well, 
not a problem with the Wiggler, but with the tools), although I don't see 
why this would start happening now after using the tools for a while, unless 
the tools have a time limit. I'm using OCDRemote v2.12a, and I suspect I 
didn't have this problem with v2.12, since that's the version I started 
using, and Insight was working back then.

I've got a bunch of things to try out this weekend now: clock speed (I hear 
"-s 8" works best), OCDRemote v2.13, OCDRemote v2.12, connect pins 8 and 15 
on the Wiggler.

I looked into the Rowley Crossworks toolkit, but it's very expensive 
(probably around $700US)
I'm writing to Keil to get quotes on their tools. I'm going to try the 
evaluation of their tools though.
A 16K limit on code size doesn't make me too happy, although I have yet to 
come close to that with my code.

Thanks

On 7/15/05, Bryce Schober <bryce.schober@...> wrote:
> 
>  On 7/15/05, nuncio_bitis <nuncio.bitis@...> wrote:
> > I've recently started having problems with OCD Remote
> > 
> > I can start it up with the command :
> > ocdremote.exe -cARM7TDMI-S -p8888 -dWIGGLER -a1 -s6
> > (note - no other speed besides 6 works)
> > 
> > I then start up arm-elf-insight.exe (part of GNUARM)
> > 
> > I can connect to target, and download to RAM (which is super slow -
> > takes a few minutes to download 1500 bytes), but when I try to start
> > running, OCDremote shuts down with error:
> > Shut down sockets.
> 
> It would be more informative to see the error generated by OCDRemote.
> That usually has more details as to the cause of the failure.
> 
> -- 
> Bryce Schober
>  
>  ------------------------------
> YAHOO! GROUPS LINKS 
> 
> 
>    - Visit your group "lpc2000 <http://groups.yahoo.com/group/lpc2000>" 
>    on the web.
>     - To unsubscribe from this group, send an email to:
>    lpc2000-unsubscribe@yahoogroups.com<lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>     - Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
>    Service <http://docs.yahoo.com/info/terms/>. 
> 
> 
>  ------------------------------
>  



-- 
----------------------------------------------------------
Jim Parziale
Email: nuncio.bitis@...
Malden, MA
----------------------------------------------------------


[Non-text portions of this message have been removed]