Lpc2000

Hello
The software seems to run. The IP space is OK (I was able to get an answer 
from Ping)
But the www server is not running. I still do not know how to upload www 
files to board
memory. The software was Rowleys download. The only change - for the 
begining- was
the IP add.
All the best,
Bogdan
----- Original Message ----- 
From: "Richard" <nospam@...>
To: <lpc2000@yahoogroups.com>
Sent: Wednesday, August 31, 2005 11:18 PM
Subject: [lpc2000] Re: www server on Olimex LPC2124


> Hi,
>
>> On Olimex board (lpc2124 and cs8900a) i want to use a www server
> for remote
>> sensor reading. I tryed to use Rowley port of   uIP. FreeRTOS has
> also a
>> port but I
>> was also unable to start the server.
>
>
> Some questions:
>
> + Are you using the same board that the FreeRTOS server was tested on?
>
> + Is the software running, but the WEB server not responding, or is
> nothing working.
>
> + If the board is working, but the WEB server not responding, have
> you double checked:
>
> i/ Correct cabling (point to point of through hub)
> ii/ Compatability of IP address
> iii/ Correct port number settings
>
> + Did you try the project exactly as downloaded from the FreeRTOS.org
> site, or did you make any modifications?
>
>
>
>>
> Has anyone more luck than me in using
>> the board
>> with  a www server ?
>
>
> I just double checked from a clean install, and it worked straight
> off.
>
>
>>On board there is also some I2C EEPROM for file storage
>> but I can not figure
>> out how to upload files in the EEPROM.
>
>
> As described on the uIP WEB site, the WEB pages are built into the
> binary image.  There is a script file called 'makefsdata' that
> converts the html found in the fs (FileSystem) directory into a
> simple flat file system as hard coded C structs.  CGI scripts can
> also be created for dynamic data.
>
> The FreeRTOS.org support forum is an active resource for problem
> solving.  There is a link on the downloads page of the WEB site.
>
> Regards,
> Richard.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>