Lpc2000

> Being the proud posessor of one of the LPCC-packaged versions of the
> LPC2106 that Philips has been giving away as samples (thanks, Dave),

Don't thank me.  You gave me three of the normal packaged one, I
owe you, man. :)  You're quite welcome to it.

> It looks as though it really requires similar assembly techniques to
> those used for BGA devices, but it might be do-able using a fine tip.
> The ADI ADXL202 accelerometer uses a somewhat similar package (only
> eight pads, though) and I have successfully soldered one of those to a
> home-made PCB.

You could use a teflon board and the hotplate soldering techniqure
that the RF boys use.  It heats the whole thing up and will reflow
nearly anything with flux on it that gets near solder.

Good luck!

Cheers,
David