Lpc2000

On 26 Sep 2005 at 15:07, altlen wrote:

> I am trying to activate XCLK on lpc2294 pin 40 (P3.23). I use the
> following setup:
> 
> PLLCON - 0x3
> PLLCFG - 0x25
> PLLSTAT - 0x725
> 
> VPBDIV - 0
> 
> PINSEL2 - 0x0C6169E4 (addr A2-A19, CS2, CS3, XCLK - ON).
> 
> The status registers confirm this setting, however, I can't see XCLK.
> 
> I will appreciate any suggestions,

You might have to set the direction bit for that particular pin to output.

Regards
  Anton Erasmus

-- 
A J Erasmus