Lpc2000

--- In lpc2000@yahoogroups.com, lpc2000@yahoogroups.com wrote:
> 
> Rules:
> need to take off one pin from each side of the LQFP48. 
> JTAG pins, Vdd, Vss and UART0 pins are not an option. Try 
> to keep as much as possible functionality. Using these 
> rules please select 4 pins. Data Sheet can be found here: 
> http://www.standardics.philips.com/products/lpc2000/pdf/lpc
> 2101_2102_2103.pdf
> Chapter 5 (Page 4) has the pinout information 

I'd say that removing pin 44 (P0.14) is no option either.  With this 
pin floating at reset, you don't know whether the chip enters the 
bootloader or not.  Or is the serial bootloader now entered in some 
other way?

Karl Olsen