Lpc2000

this is getting mysterious...
philips in her November 2003 linecard
http://my.semiconductors.philips.com/acrobat/literature/9397/75012354.pdf
does not list any LPCC or HVQFN devices for LPC210X line
i've searched, i could not find reference in current datasheets and user
manuals for other than LQFP48 package!

joseph

----- Original Message ----- 
From: "gustavo_sagasti" <gustavo_sagasti@...>
To: <lpc2100@yahoogroups.com>
Sent: Saturday, February 07, 2004 8:18 AM
Subject: [lpc2100] Re: LPCC footprint and assembly


> Hi:
>
> If the LPC2106 will come in LPCC package, may we use a  socket
> adapter for through-hole PCB?
>
> SOmeone knows when this package will be available?
>
> Thanks;
>
> Gus
>
>
>
> --- In lpc2100@yahoogroups.com, "J.C. Wren" <jcwren@j...> wrote:
> > David Willmore wrote:
> >
> > > > Being the proud posessor of one of the LPCC-packaged versions
> of the
> > > > LPC2106 that Philips has been giving away as samples (thanks,
> Dave),
> > >
> > > Don't thank me.  You gave me three of the normal packaged one, I
> > > owe you, man. :)  You're quite welcome to it.
> > >
> > > > It looks as though it really requires similar assembly
> techniques to
> > > > those used for BGA devices, but it might be do-able using a
> fine tip.
> > > > The ADI ADXL202 accelerometer uses a somewhat similar package
> (only
> > > > eight pads, though) and I have successfully soldered one of
> those to a
> > > > home-made PCB.
> > >
> > > You could use a teflon board and the hotplate soldering techniqure
> > > that the RF boys use.  It heats the whole thing up and will reflow
> > > nearly anything with flux on it that gets near solder.
> > >
> > > Good luck!
> > >
> > > Cheers,
> > > David
> > >
> >     Or just use a hot air pencil, something like a Edsyn.  Put a
> little
> > solder paste down on the pads, position the part, hold it in place
> with
> > a pick, run the pencil around it a few times.  Works with MLF parts.
> >
> >     --jc
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>