>[You just don't seem to understand. 14K is the flashing rate in bytes >per second and has nothing to do with your "1M rate" which is bits per >second on TDI/TDO and clocking the JTAG state machine ] > >I believe that is what I said isnt it? Programming time is a different >issue. > >[If I told you that the CrossConnect actually runs a 4MHz clock on TCK >that's faster >than your 1M rate isn't it?] > >4MHz is higher than 1MHz sure, but the JetJTAG goes up to 10MHz as well. > >[You're comparing apples with oranges. Until you can understand that we >can write data into RAM at 200Kbytes/second (that equates to >1.6Mbit/second), you're just not going to grasp that these pieces of >hardware are comparible and, as far as I can tell form what you've said, >the CrossConnect is faster.] > >The discussion that was started began about the Wiggler. I don't know where >this crossconnect thing came into it. I know nothing about timings or >performance with that unit. I don't have one. I have a JetJTAG and a >Wiggler and that was the point of my comments and comparison. > >If you have some other unit and love it, hey I'm happy for you. But that >has nothing to do with the original post I responded to. > > We've also established that a wiggler used with CrossWorks for ARM will flash an LPC21xx faster than a JetJTAG. Michael >Chris. > > > > >Yahoo! Groups Links > > > > > > > >
Message
Re: [lpc2000] Slow OCD Remote/Insight debugging
2005-10-05 by Michael Johnson
Attachments
- No local attachments were found for this message.