Lpc2000

Simon Ansley wrote:

>I've got the VCC present on pins 1 and 2, Gnd on all of the rest of 
>the even
>numbered pins.
>The connector is wired as on the Olimex schematic. I haven't found 
>anything
>obvious like shorts to GND, so it may be something more subtle
>  
>

Usually, I use two X-acto knife blades as probes to my Ohm-meter, then 
carefully buzz out the connections.  It is easy to have a surface mount 
pad not soldered. 

Usually it is something simple, open  / shorted connection on a new board.

TomW

-- 
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net, http://cyberiansoftware.com
"Windows? No thanks, I have work to do..."
----------------------------------------------------