Re: [lpc2000] Re: Need help cross compiling with GNU toolchain for a newbie
2004-04-14 by clapper
.. a book that might be worth your time is 'Embedded System Design on a Shoestring' by Lewin A.R.W. Edwards (amazon.com). I found it useful and it covers the gnu toolchain. bryan ---------------------------------------------- Wednesday, April 14, 2004, 2:56:53 PM, you wrote: > Ok i am making progress. I understand the load scripts and stuff from > reading up on the gnu tools docs. Any hints, things to look out for > would be appreciated. > Josiah > --- In lpc2000@yahoogroups.com, "cpexed" <cpexed@y...> wrote: >> Hello, >> >> I am taking my first dive into embedded programming. I have a LCP2106 >> on an olimex dev board. >> >> I am attempting to use the gnu arm toolchain and I have the philips >> isp and have verified that it works. I also have a JTAG wiggler but >> have not got it working i suspect because my parallel port on my >> laptop only supports ecp. >> >> I just need a quick description of the requirements to get simple >> programs compiled and loaded into the correct portions of flash with >> the gnu toolchain. I have seen the examples in the files section. >> Just need a bit of description. >> >> Thanks >> Josiah > Yahoo! Groups Links > To visit your group on the web, go to: > http://groups.yahoo.com/group/lpc2000/ > \ufffdTo unsubscribe from this group, send an email to: > lpc2000-unsubscribe@yahoogroups.com > \ufffdYour use of Yahoo! Groups is subject to the Yahoo! Terms of Service. --