Lpc2000

Are you using the latest version of CrossWorks - 1.2 - which can be
downloaded from our web-site?

Regards
Michael


Message: 1
   Date: Sun, 13 Jun 2004 20:36:06 -0000

   From: "nonuckingfumber" <nonuckingfumber@...>
Subject: Flash writing limits

I have a CrossWorks connected via a wriggler clone to a simple LPC2106
based board.

I have modified the loader to allow programming through jpeg (RAM is
used as a buffer in this mode). The debugger can access the chip and
is able to read registers and load the "loader" program, but download
fails when the loader attempts to erase flash memory.

Are there any "locks" or protections on the flash that could be
preventing this?

--- In lpc2000@yahoogroups.com, "Michael Johnson" <mpj@r...> wrote:
> Are you using the latest version of CrossWorks - 1.2 - which can be
> downloaded from our web-site?
> 
> Regards
> Michael
I was using the latest version (registered it just a few days ago),
but I was failing to re-connect when altering the JTAG clock. Slowing
it down correctly solved the problem.