Yahoo Groups archive

Lpc2000

Index last updated: 2026-04-28 23:31 UTC

Thread

SPI,RF recievers.

SPI,RF recievers.

2004-06-18 by karldalen

Hallo, long time long see!

Anyhow , for my LPC2106 and MSP430f1223,

(this is a cross posting to msp430 list,!)

im looking for low cost, low pin count single chip RF
trancivers, transmitters and most of all "recievers".

Im also looking for SPI devices (recievers) that have
a internal adress decoder, e.g. first byte gives
adress, second byte gives data.

I have ben looking into Micrel,and Nordic VLSI, both
needs MCU to decode adresses, im looking for something
that does SPI but are similare to I2C adress decoding
on chip!

Any ideas most wellcome!

Reg
KD

RE: [lpc2000] SPI,RF recievers.

2004-06-18 by Curt Powell

For rf, check out chipcon (http://www.chipcon.com).  We found their
cc1000 to be pretty easy to integrate with the lpc210x.
Show quoted textHide quoted text
-----Original Message-----
From: karldalen [mailto:karldalen@...] 
Sent: Thursday, June 17, 2004 6:45 PM
To: lpc2000@yahoogroups.com
Subject: [lpc2000] SPI,RF recievers.


Hallo, long time long see!

Anyhow , for my LPC2106 and MSP430f1223,

(this is a cross posting to msp430 list,!)

im looking for low cost, low pin count single chip RF
trancivers, transmitters and most of all "recievers".

Im also looking for SPI devices (recievers) that have
a internal adress decoder, e.g. first byte gives
adress, second byte gives data.

I have ben looking into Micrel,and Nordic VLSI, both
needs MCU to decode adresses, im looking for something
that does SPI but are similare to I2C adress decoding
on chip!

Any ideas most wellcome!

Reg
KD  




 
Yahoo! Groups Links

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.