Lpc2000

  ----- Original Message ----- 
  From: Robert Adsett 
  To: lpc2000@yahoogroups.com 
  Sent: Friday, June 24, 2005 9:10 PM
  Subject: Re: [lpc2000] OT: Is there an easy way to convert expressPCB files to EAGLE files?


  At 07:01 PM 6/24/05 -0400, Pigeon wrote:
  >Hello, I have had a schematic done in expressPCB program.. and Now I want 
  >to show this file to someone else.. The issue is he only has eagle.
  >
  >What is the easiest way t oconvert between the 2?

  Isn't expressPCB designed to prevent you from doing that?  I was under the 
  impression that one of their main design goals was to lock you into using 
  their services.  The ability to export to a 'real' CAD program would run 
  counter to that. I didn't think they even produced standard Gerber files 
  much less allowed export into any format that could be read intelligently 
  by any other program.

  Robert

  " 'Freedom' has no meaning of itself.  There are always restrictions,   be 
  they legal, genetic, or physical.  If you don't believe me, try to chew a 
  radio signal. "  -- Kelvin Throop, III
  http://www.aeolusdevelopment.com/



------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/lpc2000/
      
    b.. To unsubscribe from this group, send an email to:
    lpc2000-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]