MOTM

Jeff,

I believe a couple of other differences from two cascaded MOTM-420s would be
voltage-controlled resonance and if I remember the original CS-80 filter
correctly, the fact that it may not self-resonate.  Hopefully the Old Crow
will chime in here - Oh, looks like he just posted while I was typing. :)

Not sure what a "Future Companion Module" is either, but I am quite curious!
Possibly something like Tony A's OMS-series?

George

----- Original Message -----
From: Jeffrey Pontius <jpont@...>
Sent: Monday, February 11, 2002 9:09 AM


> (1) Just taking my first look at the motm-480 panel, noticing the BP and
> LP outputs.  Is the configuration of this filter as follows: audio enters
> the low pass filter first (so is available for output) and then the low
> pass filtered audio enters the high pass filter (so audio is now band pass
> filtered)?  Hence, this is the reason that a high pass output is not
> available. If so, seems like a similar audio setup to the Korg MS20 filter
> section (though different filter designs, I assume).
>
> (2) Are there any "module connection additions" on the drawing board (or
> in someone's imagination) that make this feature worth the advertisement
> space?
>
> Thanks, Jeff