MOTM

It won't work without cutting the rack rail.  The lip that normally resides
behind the module at the top and bottom (where Paul reserved 1/2 inch in the
layout) will interfere with the jacks and PCB mounting.

If you were willing to do some heavy cutting / grinding on the MOTM rails,
you sure could.
Larry


----- Original Message -----
From: alt-mode <yahoo@...>
To: <motm@yahoogroups.com>
Sent: Sunday, January 25, 2004 8:09 PM
Subject: [motm] Horizontal Module Mounting


Howdy,

Has anyone ever mounted MOTM modules sideways using the standard rack
rails?  For example, you could take advantage of the 2U available at the
bottom of a 12U SKB pop-up case by mounting two 2U modules sideways at the
bottom.  I'm thinking of mounting an Expressionist breakout panel and a 940
patch panel in a non-MOTM area of my studio.  The 940 is very useful in
places away from my MOTM...

Eric





Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/motm/

To unsubscribe from this group, send an email to:
 motm-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/