The
19" 2U high rack panels (if you are rack mounting) I sell for power
supplies will hold larger supplies. I have some of them not drilled for
900 for just such occasions.
Larry
H
-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com]On Behalf Of Greg Amann
Sent: Thursday, August 25, 2005 3:38 PM
Cc: Chris //; motm@yahoogroups.com
Subject: Re: [motm] Swapping Power Supplies
The 800 mA Power One supply that comes in the
MOTM-900 is a different size (namely, smaller) than the HBB15-1.5A. Check
oot either the Power One site or DigiKey: both list the dimensions of the
supplies. The larger supplies will not be "screw compatible" with the 3U
'900 mounting panel.From: motm@yahoogroups.com [mailto:motm@yahoogroups.com]On Behalf Of Greg Amann
Sent: Thursday, August 25, 2005 3:38 PM
Cc: Chris //; motm@yahoogroups.com
Subject: Re: [motm] Swapping Power Supplies
PLL, BFG
synth1@... wrote:
> I am thinking big and would like to order a 1.5 amp power one linear
> supply HBB15-1.5-A or a 3 amp HCC15-3-A (i know this one is a bit
> bigger)...
>
> Can I just take out the supply from the MOTM-900 and replace it with one
> of the above, will that work??? Does the fuse need to be changed in the
> plug????
>
Just the fuse. The fuse rating you need is printed on the side of the
power supply. I use standard 5mm X 20mm fuses, "Slo-Blo" type from Bussman
or Littelfuse.
Paul S.