MOTM

Hi,

Check out David Brewster's site here
http://pugix.com/synth/portable-rack-cabinets/   He mentions one he used
that is similar: "  combination AC inlet, power switch and fuse, Schurter
IEC320 AC I, (Mouser 693-4304.6090) for $9.00" 

Inspired by David's site I'm using similar cabinets and power supply setup.
I decided to get 'fancy' and use a more expensive AC inlet that has line
filtering, even though it may not be of any real value (I whole heartedly
believe in over kill! ;-)
http://www.alliedelec.com/Search/ProductDetail.aspx?SKU=6894156&MPN=864-03%2
f003&R=6894156&SEARCH=6894156&DESC=864-03%2f003  It's $30 plus tax and
shipping though!!!! ;-(   Besides filtering it has voltage selection and
since the PowerOne can accept 120 or 220 AC, I thought I would wire it up
with an inlet that could be switched. (I've NEVER traveled to England or
Japan etc and have no plans to do so but . . . obsessive compulsive behavior
doesn't like to be ignored! ;-)

If you look at Allied's main page for power inlets they show a 'Top seller'
for $8.50 that looks like it should work too. And there is a mind boggling
TON of different models to choose from!
http://www.alliedelec.com/search/SearchResults.aspx?N=4294821653&SKU=689-415
6&sid=11C342467F33

Best of luck!

John l Rice


-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
sduck409
Sent: Friday, September 05, 2008 5:10 PM
To: motm@yahoogroups.com
Subject: [motm] Switch for 900?

Does anyone know a mouser/digikey number for the switch that's used in
the 900 power supply? I've got everything I need for the power supply
in this new cabinet I'm building except for the switch - and as
everything else in it is up to motm specs, I'd like the switch to be too. 

Thanks!


------------------------------------

Yahoo! Groups Links