MOTM

Hi Guys!

I need to ask if anyone out there can assist me with designing panel 
graphics with the templates you have created in Corel Draw. I am planning to 
build a small series of CEM modules to add to my MOTM rack. I will of course 
be using the MOTM blank PCB and a 2-space panel for all of the modules. I 
will be able to provide you with an panel mock up similar to a standard MOTM 
module with all of the switches and knobs/jacks labeled. I think that the 
stick on panel label is the most cost effective way to go and from the 
pictures I've seen on Ken's sight and from Larry I have no complaints about 
the end result. What type of finish do you guys put over the label in the 
end? I will pay you for your time and help if you can give a brother a 
break.

I am planning the following modules, with most of the filters ending up very 
smiliar in overall function to an MOTM module with a much more jimmy-rigged 
insides I assur you! Hah:

1. CEM3320 Low Pass (Sequential Pro-1 VCF) with 3 inputs with attenuators, 
FM 1 and FM 2 similar to the 420 or 440, VC Resonance, and I'm not sure 
exactly about the v/oct feature. I need to look more deeply at the MOTM 
schematic.

2. CEM3310 VC ADSR with CV inputs/attenuators on A, D, S & R controls. Will 
have gate and trigger inputs with a positive going output. Here's the VC 
envelope generator we all talked about wanting but you have to build it 
yourself from scratch (more like a grown up version of Lincoln Logs to me 
anyways)

3. CEM3328 VCF Low Pass similar to above, but I figure you can never have 
too many filters right. C'mon I make dance and techno music!

4. CEM3340 VCO for this one, I know it's not that smart, but I just have to 
have one since my favorite fully fabricated synths all use them (SH-101, 
MC-202 and MKS-80) All on the standard features of the classic CEM VCO

Thats it and I plan to work on one at a time with the VC ADSR being first. 
Please let me know if you are interested in co-designing any of these 
modules in conjunction with me or a small group of us off list. I for sure 
plan to take advantage of Paul's ample stock of classic CEM while he has it 
and no later because it will be gone someday. Each module shoul be fairly 
easy to build on Pauls blank PCB and the end result will fit right into the 
scheme of the MOTM rack.

If anyone out there is interested in providing me(We?) with labels please 
let me know. I will of course need a panel drilling test and a final quality 
lable for each module built. Thanks for your help or if you've read into 
this to this point, thanks for listening

Thomas White
DJTW
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com