MOTM

My CV-5 is here finally, boy....what a nice box for the money!
Love the midi syncable LFO!
Highly recommended
Jim

sikorsky wrote:

> hello all
>
> > Don't stick the output of the LFO into a '820 CV input would work.
> > But, you just need DC offset to avoid negative voltages. I think the
> > SAW out, with SHAPE around mid-range, will work. Check it on a 'scope.
> > This will make a 0-5V triangle.
>
> a gasp escapes from somewhere near the back of my mind...
> so the CV inputs should be triggered by EGs only then
> it's just that i immediately thought it would be cool to stick a load of
> LFOs into everything (my stock response to any box that has a "CV IN"
>
> > > or is there something already in there to stop this..?
> > Nope.
> i couldn't do something with a diode over the control inputs could i...?
> (ducking)
>
> > If the GATE does go to near ground (say, below 0.050V) then it should
> > BYPASS. I will test this out today and add a blurb to the manual. THe
> > pullup resistor is 2K7 to to +15V. So, you need to NOT hook it up to say
> TTL
> > outputs :) Moog S-Trig with pullup to +15V (an option of Kenton Pro-2000)
> > should work, as well as true open-collector outputs.
>
> or a Korg S-Trig style 5V..? (that last sentence went right over my head
> today)
>
> > > 3) had to look - who is "dork" in the /pix directory..?
> > Err... that would be ME, circa 1978.
>
> that's nothing, i was only ten then, however at least i could blame my
> parents for any fashion mistakes back then :)
>
> cheers
> paul b
>