MOTM

Maybe not the classiest of all options...
I used a white marking tape to mark the edges between modules. It's
not 
the best solution, but the tape color closely matches the silkscreen 
paint and never yellows or falls off. The tape is actually a
polyester 
film tape used in covering up marks on veloxes (those of you in
graphic 
design or production will know what I'm talking about.) I get mine
from 
a complany called Craig Cold Type Supply, their phone# is 1-800-543-
1191 is anyone is interested. When I get home, I'll snap a picture
with 
the digitl camera, if anyone wants to see what it looks like. -Nate


--- In motm@egroups.com, ixqy@a... wrote:
>  Greetings all,
>  Well, I found in the archives that others have also thought about
"visually" 
> separating the various modules in their MOTM setups....
> 
>  After calling around, I've made two trips to a local hobby shop
and bought 
> about $20 of this plastic trim that is used for models. It's called 
> "Plastruct". Here's a site that has some pics of the various shapes
offered:
> 
> http://www.piko.de/d/plastruct/s-plastruct.htm
> 
>  I bought various shapes and sizes, but have found that none of
them have 
> worked so far. One of the problems is that once I get to a big
enough size to 
> fit the thickness of the MOTM panels, the part that is wedged in
between the 
> modules it too thick, not allowing the modules to line up with the
rack rail 
> mounting holes. (bummer!)    For the Plastruct (U or H shape)
pieces that are 
> smaller, they wont fit around the MOTM panel or they just fall off
("T" 
> shapes wedged between modules).
> 
>  Anyway, I just thought I'd pass this info on to the list. It seems
that one 
> of the size/shape combos should work for this purpose, I just can't
figure 
> out which. Maybe someone else will have better luck than I did. : )
> 
>  Has anyone had any other ideas or success in accomplishing this?
> 
>   Uhm.... bye.
>  (I never know what to write here!)  : )
>  Andrew Sanchez