MOTM

Did you forget the little jumpers on the cv input jacks from ground 
lug to normalling lug?

Moe

--- In motm@y..., elhardt@a... wrote:
> Today I'm hearing my MOTM for the first time.  The only mistake I 
made was 
> swapping the FM1 and FM2 pots on one of my 420 filters (easy to 
correct).  
> Everything else in my blue case seems to work fine, except the 
behavior of 
> probably the simplest module (MOTM-700) is strange.  I can plug in 
an LFO, 
> VCO or EG and watch the LED go from red to green based on the CV 
input.  But 
> I have to set the knob/switches down to between -4 and -5 to see 
that happen. 
>  With no cable in the CV input, I can't turn the switch and see the 
LEDs flip 
> as the manual indicates.  There are no adjustments on the board.  
Both 
> channels behave exactly the same.  It does switch between two 
different audio 
> inputs and therefore seems to function.  It almost seems like the 
values of 
> the pots are wrong yet they match the manual.  Has anybody seen 
this problem? 
>  If not, I'll have to troubleshoot it.  Thanks.
> 
> -Elhardt