MOTM

Yeah, I suppose I'm a bit of a masochist.  I didn't start out to 
keep swapping resistors, I started with a 200K 20 turn trimmer in 
series with a 2M, but it turned out the 2M was too large and 
everytime I downsized the resistor it was still too large till I got 
to 1.5M.  A 1.3M might even be better but I considered the accuracy 
to be good enough at 1.5M.

As I said, I'm very pitch sensitive and the MOTM is the synth I have 
dreamed of having for 20 years so I'm going to get it as close to 
perfect as I can.

BTW I ended up keeping the 1.8M R36 in all 6 of my 310s.  I just got 
4 more 300 kits from Paul and I'll start with a R50 of 1.5M.