MOTM

Hi all.

I'm really glad this subject has been brought up.

First off, if there is a "minimum" of format change for these modules I 
choose to echo Mr. Brester's statement:

I'd like to see a style that
would blend in nicely with other MOTM modules, while at the same time 
having
distinctive differences.  Like two knob sizes -- the standard and a 
smaller
size, different jack arrangement -- maybe co-locating some jacks near
associated pots, and possibly a different grid.  A different typeface or
tick mark scheme could be nice.

Whatever the particulars, I'd like to see a consistent design theme for 
the
whole 200 series.  It should pay homage to Buchla and still be instantly
recognizable as MOTM


But to that I'd also add.....

Why not experiment a bit?


I'll start by saying it is my *opinion* that, for my uses, the current 
MOTM is too big, and is limited in its use of panel space by oversized 
knobs. Furthermore it is my *opinion* that it pays too much homage to a 
retro-Moog look that, while it is a good selling point for a target 
market of folks that always wanted one, doesn't reflect the more 
progressive nature of Paul's design philosophy (and is way too big!!).

I bought MOTM for what was on the inside AND what was behind the 
company--not what it looked like. It is my assumption that a few others 
did as well.

Anyway. In short I ask "why not go nuts".

Silver panels with colored overlay. Small info graphics that might give 
you ideas while you are patching or provide you with needed info. 
Banana jacks where you can fit them. Votlage control of EVERYTHING. 
Smaller knobs where appropriate. Sliders even! In terms of the haptics 
of a device pulling and pushing are (duh) a much different sensation 
that twisting a knob. Maybe this makes better/worse but at least a 
*different* interaction.

In 10 years will MOTM still be a wall of back Moog-ish panels w/ 1/4" 
jacks and the same white lettering? Will every retro filter have been 
cloned? I hope not. Maybe if we all keep buying this stuff Paul will 
have the resources to make modules that *have never existed 
before*--voltage control of an I-Pod? I dunno--not practical but might 
be interesting.

I think that Paul's 500 series modules is just the tip of the iceberg 
in terms of directions MOTM could go.

If Paul decides to release a module housed inside an old "Hungry, 
Hungry Hippos" game and it sounds good/new/crazy I'd buy it. Surely 
there must be some room for experimentation.


Keep it beep.

ad



_____________________
Receive-Transmit
Marienburgerstr. 33
10405 Berlin
Germany
_____________________
www.receive-transmit.com
+49 030.231.80965
+49 179.750.1854

Actually, I too agree that "going nuts" on the 200 series could be very
cool.  The only truly necessary MOTM compatibility is electrical.  Let
psychedelic colors reign!  But there is a caveat.  A radical departure from
the MOTM style could be viewed in marketing terms as a new product line.  A
new product line can be costly to develop and risky, but if a market exists
it can be worth the gamble.  The MOTM quality reputation would follow any
new product line from Synthesis Technology.  But I didn't think Paul was
considering that much of a departure, and hence my more conservative take.
Even though *we* know the quality is internal, the MOTM brand has a
recognition factor in the panel style displayed prominently in the website
photos that adds great business value to the product.  It would be smart to
"leverage" that recognition factor for new products, as the marketing
weasels would say.  But business is also about taking risks.

Okay, now I have to read the other 30 comments on the 200 series I haven't
reached yet :).

-Richard Brewster

----- Original Message ----- 
From: Aaron Day
To: motm@yahoogroups.com
Sent: Wednesday, June 11, 2003 6:15 AM
Subject: Re: [motm] 200 Series. Set your phasers to kill.....


Hi all.

I'm really glad this subject has been brought up.

First off, if there is a "minimum" of format change for these modules I
choose to echo Mr. Brester's statement:

I'd like to see a style that
would blend in nicely with other MOTM modules, while at the same time having
distinctive differences.  Like two knob sizes -- the standard and a smaller
size, different jack arrangement -- maybe co-locating some jacks near
associated pots, and possibly a different grid.  A different typeface or
tick mark scheme could be nice.

Whatever the particulars, I'd like to see a consistent design theme for the
whole 200 series.  It should pay homage to Buchla and still be instantly
recognizable as MOTM


But to that I'd also add.....

Why not experiment a bit?

Anyway. In short I ask "why not go nuts".