MOTM

to the list -
i know a couple of folks out there have serge "tkb"`s but does anyone have 
any other serge modules ?  do you have a panel/rack with some blank space ( i 
guess that means pre-sts ) ? while rooting around in some old papers, i came 
across a schematic of the old serge peak and trough module that serge had 
sent me years ago in answer to a question about it. i`d gladly share a copy 
of the schematic with anyone who wants one. plus, he found a faceplate legend 
( if you know old serge stuff, the graphics were printed on ( i guess ) 
contact paper to be applied to the metal panels in your chosen layout ). i 
still have this, too, so if you have a dual space in your panel, please 
contact me and i`ll send you the faceplate legend and a copy of the 
schematic. to anyone else interested in the schamatic on a d.i.y. basis, send 
me a  s.a.s.e. and i`ll be glad to send you a copy. just let me know......
best,
dave v.

david vosh
6300  goldenrod  court
upper marlboro, maryland
20772

Can you scan it?

> -----Original Message-----
> From: davevosh@... [mailto:davevosh@...]
> Sent: Monday, July 03, 2000 6:19 PM
> To: motm@egroups.com
> Subject: [motm] serge peak and trough schemo / faceplate graphic
>
>
> to the list -
> i know a couple of folks out there have serge "tkb"`s but does
> anyone have
> any other serge modules ?  do you have a panel/rack with some
> blank space ( i
> guess that means pre-sts ) ? while rooting around in some old
> papers, i came
> across a schematic of the old serge peak and trough module that serge had
> sent me years ago in answer to a question about it. i`d gladly
> share a copy
> of the schematic with anyone who wants one. plus, he found a
> faceplate legend
> ( if you know old serge stuff, the graphics were printed on ( i guess )
> contact paper to be applied to the metal panels in your chosen
> layout ). i
> still have this, too, so if you have a dual space in your panel, please
> contact me and i`ll send you the faceplate legend and a copy of the
> schematic. to anyone else interested in the schamatic on a d.i.y.
> basis, send
> me a  s.a.s.e. and i`ll be glad to send you a copy. just let me know......
> best,
> dave v.
>
> david vosh
> 6300  goldenrod  court
> upper marlboro, maryland
> 20772
>
>
>
>
> ------------------------------------------------------------------------
> Life's too short to send boring email. Let SuperSig come to the rescue.
> http://click.egroups.com/1/6137/6/_/529958/_/962673552/
> ------------------------------------------------------------------------
>
>
>

In a message dated 00-07-03 21:28:56 EDT, you write:

<< Can you scan it? >>


tony,
no, sorry....i lack the technology. i`d be glad to send you a copy, though.
best,
dave v.

Funny you should mention this, I've spent several hours over the past week 
trying to make some full panel size decals to cover my old Serge panels which 
house my diy stuff (I'm trying to bond a legended transparency to some steel 
gray card stock -- no luck as yet, air bubbles and the like, much more 
difficult than I thought it would be). I should point out that I also have a 
few Serge decals (VCFQ, DSG, Universal Audio Processor) which I can't imagine 
being able to use, unless STS starts selling individual module kits again, 
which I assume is highly unlikely.  Maybe I could just use some CEM ICs and 
slap the decals on the front.

Let me know what you want to do Dave.
JB

In a message dated 7/3/2000 6:20:28 PM, davevosh@... writes:

>do you have a panel/rack with some blank space ( i 
>guess that means pre-sts ) ? while rooting around in some old papers, i
>came 
>across a schematic of the old serge peak and trough module that serge had
>sent me years ago in answer to a question about it. i`d gladly share a
>copy 
>of the schematic with anyone who wants one. plus, he found a faceplate
>legend 
>( if you know old serge stuff, the graphics were printed on ( i guess )
>contact paper to be applied to the metal panels in your chosen layout ).
>i 
>still have this, too, so if you have a dual space in your panel, please
>contact me and i`ll send you the faceplate legend and a copy of the 
>schematic. to anyone else interested in the schamatic on a d.i.y. basis,
>send 
>me a  s.a.s.e. and i`ll be glad to send you a copy. just let me know......

In a message dated 00-07-03 21:55:19 EDT, you write:

<< Let me know what you want to do Dave. >>


john,
i`m not sure what you meant by this - ?  did you want a copy of the peak / 
trough schematic ?  it is very simple and would be a good  d.i.y.  project.
from years back, when i built my late lamented serge, i ,too, found it tricky 
to get the panel graphics on nicely. i ended up sticking on the top edge then 
gently peeling down and following over it with a roller ( i used a "d" cell 
for the smaller modules and bought a length of dowel to cut to 3 and 4 spaces 
for the larger modules ). this seemed to work pretty well as far as surface 
contact and getting rid of air bubbles.
re : other graphics you might have - well, you could kludge up a vcf from cem 
chips that would pretty much match the vcf but for the more esoteric modules 
like the "dsg" i`m not sure that would work.
best,
dave v.