The Mellotron Group

Thanks Frank-
 
   It's nice to know there is a source for these PAL connectors.  I didn't know they were considered to be 75-ohm antenna connectors.
 
   I also chose the RCA connector route for my 'tron interconnects.
 
   -Bruce D.
 

________________________________
 From: "lsf5275@aol.com" <lsf5275@aol.com>
To: newmellotrongroup@yahoogroups.com 
Sent: Tuesday, May 15, 2012 12:58 AM
Subject: Re: [newmellotrongroup] MELLOTRON PARTS WANTED $$$$$$$ Mk 5 and m400
  

 
   
 
 http://www.altronics.com.au/index.asp?area=prod&grp=364 

You'll want P0229 and P0227 probably, although it's a simple matter to swap 
out for RCA Plugs and sockets. 

In a message dated 5/15/2012 1:26:57 A.M. Eastern Daylight Time, 
vincentgallo@vincentgallo.com writes: 
  
>I am restoring a pair of Mellotron Mk 5's and urgently need the following  parts. I hope you can help.
>
>Wanted Mk 5 dual volume pedal and cinch 
  connecters for Volume pedal connection
>Wanted Mellotron headlock 
  connectors. Male and Female needed
>Wanted Mk 5 power switch (rocker 
  type)
>Wanted original Mellotron Keyboard and frame
>
>I am always 
  buying and paying top dollar for vintage Mellotron Tape racks and tape rack 
  cases and or any other vintage Mellotron parts. 
>
>Thank you
>
>nbvbn@earthlink.net
>
>