Thanks Frank-
It's nice to know there is a source for these PAL connectors. I didn't know they were considered to be 75-ohm antenna connectors.
I also chose the RCA connector route for my 'tron interconnects.
-Bruce D.
________________________________
From: "lsf5275@aol.com" <lsf5275@aol.com>
To: newmellotrongroup@yahoogroups.com
Sent: Tuesday, May 15, 2012 12:58 AM
Subject: Re: [newmellotrongroup] MELLOTRON PARTS WANTED $$$$$$$ Mk 5 and m400
http://www.altronics.com.au/index.asp?area=prod&grp=364
You'll want P0229 and P0227 probably, although it's a simple matter to swap
out for RCA Plugs and sockets.
In a message dated 5/15/2012 1:26:57 A.M. Eastern Daylight Time,
vincentgallo@vincentgallo.com writes:
>I am restoring a pair of Mellotron Mk 5's and urgently need the following parts. I hope you can help.
>
>Wanted Mk 5 dual volume pedal and cinch
connecters for Volume pedal connection
>Wanted Mellotron headlock
connectors. Male and Female needed
>Wanted Mk 5 power switch (rocker
type)
>Wanted original Mellotron Keyboard and frame
>
>I am always
buying and paying top dollar for vintage Mellotron Tape racks and tape rack
cases and or any other vintage Mellotron parts.
Show quoted textHide quoted text
>
>Thank you
>
>nbvbn@earthlink.net
>
>