Yahoo Groups archive
Thread
2007-11-26 by Hessel Herder
Hi guys, Occasionally,my Tron appears to be a bit wobbly all over the keyboard,even after warmup,just playing one note,any note.It even seems to be a periodical wobble.This would be the CMC4 acting up I presume? Cheers,H
2007-11-27 by lsf5275@aol.com
In a message dated 11/26/2007 4:07:38 P.M. Eastern Standard Time, hessel@soundscape.nl writes: Hi guys, Occasionally,Occasionally,<WBR>my Tron appears to be a bit wobbly all over the keyboard,even after warmup,just playing one note,any note.It even seems to be a periodical wobble.This would be the CMC4 acting Cheers,H Serial number please. Frank Stickle **************************************Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
2007-11-27 by james.parthun@att.net
872 has the same problem! Regards, Jim Parthun Parthun Enterprises, Inc. 630/968-8731 Office 630/968-8732 Fax 630/533-8340 Cellular _____
From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of Hessel Herder Sent: Monday, November 26, 2007 3:06 PM To: New Group Subject: [newmellotrongroup] CMC4 Hi guys, Occasionally,my Tron appears to be a bit wobbly all over the keyboard,even after warmup,just playing one note,any note.It even seems to be a periodical wobble.This would be the CMC4 acting up I presume? Cheers,H
2007-11-27 by tronbros@aol.com
In a message dated 26/11/2007 21:07:06 GMT Standard Time, hessel@soundscape.nl writes: Occasionally,Occasionally,<WBR>my Tron appears to be a bit wobbly all over the keyboard,even after warmup,just playing one note,any note.It even seems to be a periodical wobble.This would be the CMC4 acti It's all down to motors that are 25 years passed their sell by date with worn plain bearings and old style motor controllers. The pairing up is a disaster. Best, Martin Streetly Electronics - All Things Mellotronic _www.mellotronics.com_ (http://www.mellotronics.com/) US Sales East: Jimmy Moore_ JMoore6397@aol.com_ (http://JMoore6397@aol.com/) US Sales West: Paul Cox_ pjc56@earthlink.net_ (http://pjc56@earthlink.net/)
2007-11-27 by Hessel Herder
Hi Frank, #920 Regards,H _____
From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of lsf5275@aol.com Sent: dinsdag 27 november 2007 1:15 To: newmellotrongroup@yahoogroups.com Subject: Re: [newmellotrongroup] CMC4 In a message dated 11/26/2007 4:07:38 P.M. Eastern Standard Time, hessel@soundscape.nl writes: Hi guys, Occasionally,my Tron appears to be a bit wobbly all over the keyboard,even after warmup,just playing one note,any note.It even seems to be a periodical wobble.This would be the CMC4 acting up I presume? Cheers,H Serial number please. Frank Stickle _____ Check out AOL Money Finance's list of the hottest products <http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001> and top money wasters <http://money.aol.com/top5/general/ways-you-are-wasting-money?NCID=aoltop000 30000000002> of 2007.
2007-11-27 by mellotronist
2007-11-27 by Hessel Herder
How is yours behaving then ? : ) _____
From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of mellotronist Sent: dinsdag 27 november 2007 13:28 To: newmellotrongroup@yahoogroups.com Subject: Re: [newmellotrongroup] CMC4 I believe that's the closest to my #886 that I've seen yet. #920
2007-11-27 by tomdcour
---I'm not an "expert" but I had trouble with my servo at one point, giving the wobble effect you describe. I cleaned the tape head that was reading sync information off the motor gear- it was absolutely covered with crap. After that my tron limped along famously for years before Mr. Korb completely healed it. BTW I think I have cmc2 on #390 In newmellotrongroup@yahoogroups.com, "Hessel Herder" <hessel@...> wrote:
> > How is yours behaving then ? : ) > > > _____ > > From: newmellotrongroup@yahoogroups.com > [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of mellotronist > Sent: dinsdag 27 november 2007 13:28 > To: newmellotrongroup@yahoogroups.com > Subject: Re: [newmellotrongroup] CMC4 > > > > > I believe that's the closest to my #886 that I've seen yet. > > #920 >
2007-11-27 by tomdcour
Yes indeed--- In newmellotrongroup@yahoogroups.com, "tomdcour" <tomdcour@...> wrote: > > ---I'm not an "expert" but I had trouble with my servo at one point, giving the wobble > effect you describe. I cleaned the tape head that was reading sync information off the > motor gear- it was absolutely covered with crap. After that my tron limped along famously
> for years before Mr. Korb completely healed it. BTW I think I have cmc2 on #390 > > > In newmellotrongroup@yahoogroups.com, "Hessel Herder" <hessel@> wrote: > > > > How is yours behaving then ? : ) > > > > > > _____ > > > > From: newmellotrongroup@yahoogroups.com > > [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of mellotronist > > Sent: dinsdag 27 november 2007 13:28 > > To: newmellotrongroup@yahoogroups.com > > Subject: Re: [newmellotrongroup] CMC4 > > > > > > > > > > I believe that's the closest to my #886 that I've seen yet. > > > > #920 > > >
2007-11-27 by tomdcour
---I'm not near the studio right now but it is right next to the motor in bettween the motor itself, the wooden mount and the belt pulley. If you don't have one then our servos are different, I will look for some photos. In newmellotrongroup@yahoogroups.com, "tomdcour" <tomdcour@...> wrote:
> > Yes indeed--- In newmellotrongroup@yahoogroups.com, "tomdcour" <tomdcour@> > wrote: > > > > ---I'm not an "expert" but I had trouble with my servo at one point, giving the wobble > > effect you describe. I cleaned the tape head that was reading sync information off the > > motor gear- it was absolutely covered with crap. After that my tron limped along > famously > > for years before Mr. Korb completely healed it. BTW I think I have cmc2 on #390 > > > > > > In newmellotrongroup@yahoogroups.com, "Hessel Herder" <hessel@> wrote: > > > > > > How is yours behaving then ? : ) > > > > > > > > > _____ > > > > > > From: newmellotrongroup@yahoogroups.com > > > [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of mellotronist > > > Sent: dinsdag 27 november 2007 13:28 > > > To: newmellotrongroup@yahoogroups.com > > > Subject: Re: [newmellotrongroup] CMC4 > > > > > > > > > > > > > > > I believe that's the closest to my #886 that I've seen yet. > > > > > > #920 > > > > > >
2007-11-27 by Hessel Herder
---I'm not near the studio right now but it is right next to the motor in
bettween the
motor itself, the wooden mount and the belt pulley. If you
don't have one then our servos
are different, I will look for some
photos.
In newmellotrongroup@yahoogroups.com,
"tomdcour" .> wrote:
>
> Yes indeed--- In newmellotrongroup@yahoogroups.com,
"tomdcour"
> wrote:
> >
> > ---I'm
not an "expert" but I had trouble with my servo at one point, giving the wobble
> > effect you describe. I cleaned the tape head that was reading sync
information off the
> > motor gear- it was absolutely covered with
crap. After that my tron limped along
> famously
>; > for years
before Mr. Korb completely healed it. BTW I think I have cmc2 on #390
>
>
> >
> > In newmellotrongroup@yahoogroups.com,
"Hessel Herder" wrote:
> > >
> > > How
is yours behaving then ? : )
> > >
> > >
> >
> _____
> > >
> > > From: newmellotrongroup@yahoogroups.com
>
> > [mailto:newmellotrongroup@yahoogroups.com]
On Behalf Of mellotronist
> > > Sent: dinsdag 27 november 2007
13:28
> > > To: newmellotrongroup@yahoogroups.com
>
> > Subject: Re: [newmellotrongroup] CMC4
> > >
> >
>
> > >
> > >
> > >; I believe that's
the closest to my #886 that I've seen yet.
> > >
> > >
#920
> > >
> >
>
2007-11-27 by lsf5275@aol.com
In a message dated 11/27/2007 2:59:20 A.M. Eastern Standard Time, tronbros@aol.com writes: It's all down to motors that are 25 years passed their sell by date with worn plain bearings and old style motor controllers. The pairing up is a disaster. Best, What do you recommend? **************************************Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
2007-11-27 by lsf5275@aol.com
In a message dated 11/27/2007 6:29:55 A.M. Eastern Standard Time, hessel@soundscape.nl writes: Hi Frank, #920 Regards,H I'm surprised that it doesn't have a CMC-10. I was expecting a much lower serial number. Best, Frank **************************************Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
2007-11-27 by Hessel Herder
Agreed, CMC4 's are most common in M300's aren't they _____
From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of lsf5275@aol.com Sent: dinsdag 27 november 2007 16:02 To: newmellotrongroup@yahoogroups.com Subject: Re: [newmellotrongroup] CMC4 In a message dated 11/27/2007 6:29:55 A.M. Eastern Standard Time, hessel@soundscape.nl writes: Hi Frank, #920 Regards,H I'm surprised that it doesn't have a CMC-10. I was expecting a much lower serial number. Best, Frank _____ Check out AOL Money Finance's list of the hottest products <http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001> and top money wasters <http://money.aol.com/top5/general/ways-you-are-wasting-money?NCID=aoltop000 30000000002> of 2007.
2007-11-27 by MAinPsych@aol.com
In a message dated 11/27/2007 7:27:11 AM Eastern Standard Time, mellotronist@cox.net writes: I believe that's the closest to my #886 that I've seen yet. #920 Mine is #908. Frank 1 **************************************Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
2007-11-27 by gino wong
I like my wobble gw
2007-11-27 by ceccles_ca
--- In newmellotrongroup@yahoogroups.com, "mellotronist" <mellotronist@...> wrote: > > I believe that's the closest to my #886 that I've seen yet. > > #920 > Jon: Jim's is #872. That's close too. Clay
2007-12-04 by tomdcour
---Yes I will, it's in another computer photo library so I apologize for the delay. Mine is a servo motor 2 that was installes in the 70's by Sound Sales- maybe yours is different and doesn't employ the tape head. Any one else on the list know what I'm talking about? In newmellotrongroup@yahoogroups.com, "tomdcour" <tomdcour@...> wrote:
> > Yes indeed--- In newmellotrongroup@yahoogroups.com, "tomdcour" <tomdcour@> > wrote: > > > > ---I'm not an "expert" but I had trouble with my servo at one point, giving the wobble > > effect you describe. I cleaned the tape head that was reading sync information off the > > motor gear- it was absolutely covered with crap. After that my tron limped along > famously > > for years before Mr. Korb completely healed it. BTW I think I have cmc2 on #390 > > > > > > In newmellotrongroup@yahoogroups.com, "Hessel Herder" <hessel@> wrote: > > > > > > How is yours behaving then ? : ) > > > > > > > > > _____ > > > > > > From: newmellotrongroup@yahoogroups.com > > > [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of mellotronist > > > Sent: dinsdag 27 november 2007 13:28 > > > To: newmellotrongroup@yahoogroups.com > > > Subject: Re: [newmellotrongroup] CMC4 > > > > > > > > > > > > > > > I believe that's the closest to my #886 that I've seen yet. > > > > > > #920 > > > > > >