Hi everyone. I am experiencing an issue with
my Matrix-12, the first issue it has ever had. I sincerely ask that our
esteemed panel of OB experts please provide any comments or suggestions you can
regarding the following symptoms:
On power on, the instrument powers up as usual;
display reads as normal. ; Hitting a single key (anywhere) causes the
instrument to emit a note, but that note sustains and will not stop
emitting. The note being emitted is equal volume out of the left and right
1/4" outputs.
Then hitting any other key causes the
instrument to emit a second note along with the first note. But
that second note sounds "thinner." And that second note is NOT the pitch
that that second key should be emitting. (In other words, if I hit a C4 as the initial note (that then
sustains), and then hit a C3, the second note is not a C3 but some pitch higher
than even the C4 note).
Hitting a third key does not appear to emit an
additional sound.
Entering another patch number results in the new
patch being displayed in the readout, and the sustained note (and thinner second
note) now turning off.
However, hitting any key now emits no sound
whatsoever. Selecting Master Tune and tuning VCOs, VCAs etc. results in all
PASS.
;
I can select MASTER and modules as normal, and
they display as normal. Only, no sound now.
Powering off and restarting results in the same
symptoms.
This is a non 12-out model, if that helps with any
diagnosis.
Thanks for your kind consideration.
Michael Padilla