OBERHEIM SYNTH

"Just don't cuddle with your cat on a nylon carpet 
before you go in there..."
Is that code?

________________________________
 From: Peter Mörck <peter@...>
To: oberheim@yahoogroups.com 
Sent: Saturday, 20 April 2013, 12:42
Subject: Re: [oberheim] Matrix-1000: one voice faulty, replace chip?
 


  
Before you replace:
Try to swap the chip for voice 2 with that 
of another one and see if the problem moves as well.
Sometimes just pressing down on the chips to reseat 
them in the sockets is enough.
Removing them or putting them back might help as 
well.
Just don't cuddle with your cat on a nylon carpet 
before you go in there...
 
BR,
Peter
 
 
----- Original Message ----- 
>From: hawkberg 
>To: oberheim@yahoogroups.com 
>Sent: Saturday, April 20, 2013 12:28  PM
>Subject: [oberheim] Matrix-1000: one  voice faulty, replace chip?
>
>  
>Hi
>
>I recently bought a Matrix-1000, which the seller claimed was in 
  perfect condition. When it arrived, I quickly discovered this was not so 
  :-(
>
>One of the voices (or one of the oscillators of one of the voices ) 
  is not functioning properly, the symptoms vary a lot from one patch to 
  another.... from being completely silent to having a wrong pitch or other 
  anomaly)
>
>I did return to factory defaults + ran calibration: no 
  effect.
>
>Then I put it in "show voices played" mode, and the faulty 
  voice always shows up at voice number 2.
>
>Any idea if this means I can 
  have one of the CEM chips in it replaced?
>Anyone with similar 
  experiences?
>
>grateful for any help or 
  tip
>
>regards
>HÃ¥kon
>
>