OBERHEIM SYNTH

Is there anybody out there who could tell me how it works to sequence
analogue synth with the back CV and gate outputs?
It is possible for me to play with my OBXa (using the DSX) some other
synth. but if I use the recorded sequences I could only play the OBXA
and no other synth. I activated any button that could fulfill my wish
(as read in the manual) but nothing happens. It could only be a small
mistake but I couldn�t find it.

The DMX & DSX output a sync tone called FSK.  If you use a converter  
box, it can be used to sync MTC machines.

A good article here:

http://www.recordingeq.com/EQ/req1000/sync2.htm

Never used a converter box but could sync everything up using an Atari  
app called:

EditTrack.

Using EditTrack, you don't need the box.  EditTrack is still available  
for FREE at:

http://tamw.atari-users.net/

Tim is a great guy and will do anything to help you.  He has set these  
old apps free by hounding the original owners for public domain rights.

There is a program that will turn a PC into an Atari and it is  
available at Tim's site.

Hope this helps!

Charlie

On May 26, 2008, at 12:01 PM, stefan_schoenhof wrote:

> Is there anybody out there who could tell me how it works to sequence
> analogue synth with the back CV and gate outputs?
> It is possible for me to play with my OBXa (using the DSX) some other
> synth. but if I use the recorded sequences I could only play the OBXA
> and no other synth. I activated any button that could fulfill my wish
> (as read in the manual) but nothing happens. It could only be a small
> mistake but I couldn´t find it.
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>