Discussion about the Korg PolySix synthesizer

Hi Andy,

I really could use that Farnell parts list - It turns out that Farnell's part numbers ARE interchangeable with Newark's as you suggested, so if you could email me the Farnell list I will go about searching it through and assembling an equivalent project for us KLM board stuffers in North America.

Thanks again for everything,

Tony

--- In PolySix@yahoogroups.com, Andrew Jury <andy@...> wrote:
>
> Hi,
> 
> I have a near complete list of parts using Farnell if you are interested.
> Some of these parts are not difficult to obtain, even in a third worlds
> county such as the UK! I believe that Farnell trade in the US as ŒNewark¹.
> For example 140-50N2-100J-TB-RC (Mouser) is equivalent to Farnell part
> number 1141756 (10pF/50v ceramic). It also helps to have a line up of
> different suppliers in case stock is not available. I could suggest a few
> but I think they are UK only. What we need is someone selling a bag of
> components along with the boards so that it is a complete kit!
> 
> Cheers,
> Andy 
> 
> 
> On 21/04/2010 20:09, "psicraft_designs" <tony@...> wrote:
> 
> >  
> >  
> >  
> >    
> > 
> > Hi everyone,
> > 
> > As a member of the groupbuy set up by HyperJed, I am going about acquiring the
> > parts needed to populate the new KLM367-a PCBs I have coming - No doubt there
> > are many of you in the same boat.
> > 
> > Jed has been thoughtful enough to provide parts lists on the group buy list,
> > but of course this is only the main piece of the pirate's treasure map and not
> > the buried chest of doubloons we are after - I am starting this thread to
> > serve as a focus for our combined efforts to source and order all the parts
> > required from the numerous vendors in question.
> > 
> > Let me start with with a note for those who plan to order from Mouser: I have
> > imported Jed's list into a mouser project that contains most of the available
> > parts in one big order. If anyone would like to get access to this please let
> > me know and we'll set it up via private message. You can order this project's
> > parts as one package for around $60 USD (depending on your local exchange
> > rates) and it includes all of the mouser part numbers in Jed's parts list with
> > the exception of the following: 140-50N2-100J-TB-RC. This part is a ceramic
> > disc capacitor that mouser will only sell in lots of 2000 (!).
> > 
> > There are also a number of items in this project that mouser has listed as
> > backorder. They are:
> > 
> > PART             DESCRIPTION                                 REQ'D
> > 291-62K-RC       Carbon Film Resistors 62Kohms 0.05          1
> > 291-68K-RC       Carbon Film Resistors 68Kohms 0.05          1
> > CMF5510K000FHEK  Metal Film Resistors 1/4watt 10Kohms 1%     1
> > 291-22M-RC       Carbon Film Resistors 22Mohms 0.05          1
> > 291-2.2M-RC      Carbon Film Resistors 2.2Mohms 0.05         1
> > UFW1H100MDD      Aluminum Electrolytic Capacitors            5
> > HEF4066BP,652    Multiplexer Switch ICs QUAD BILATERL SW     1
> > CD4051BEE4       Multiplexer Switch ICs 8-Channel Analog     2
> > CD4011UBEE4      Gates (AND / NAND / OR / NOR) Quad 2-Input  3
> > TL072ACP         Op Amps JFET Input Low Noise                3
> > CD4042BE         Latches Quad D-Type                         6
> > 
> > If you order the project without removing these items they will go into a
> > backorder, which may not be what you want.
> > 
> > For a starting question to the group, I am interested to know if anyone has a
> > source on the 140-50N2-100J-TB-RC (or has bought 2000 of them and would like
> > to sell a few ;-) ) and also if there are any opinions about simply doing a
> > backorder with Mouser vs. ordering these out of stock parts from an alternate
> > supplier like Digi-Key.
> > 
> > Let the games begin... !
> > 
> > Tony
> > 
> >  
> >    
> > 
> > 
> 
> 
> 
> [Non-text portions of this message have been removed]
>